If you ever heard Tommy Emmanuel play, you will recognize that his sound is much more than loud and dynamic. He does not use effect pedals - his sound is a marriage between his fingers, his guitars and his amplifier. AER are very proud to create an amplifier exactly to Tommy's needs. To reproduce the typical "Initiation Tone" the on-board delay had to be slightly changed. The sound Tommy produces on-stage has to be sent exactly to the front-of-house PA system. A switchable pre/post efx DI provides the tone on and off the stage.

AER Compact 60/4 Tommy Emmanuel Signature Specifications

• Channel 1: 6.3 mm (1/4") input jack as high impedance line input with pad (high/low attenuation), 9V phantom power (switchable), and gain control
• Channel 2: Combined XLR/6.3 mm (1/4") jack socket as high-impedance line or balanced microphone. Input, 48 V, gain control
• Equalizer: Three band tone controls for channel 1 and Two band tone controls for channel 2
• Colour: "Mid-cut-treble-boost"-filter
• Digital effect processor with 4 presets: 2 x reverb, delay, chorus (Effect #3 is a delay with 213.5 beats-per-minute).
• Power amp 60 W / 4 ohms
• Analog signal processing: Subsonic filter, adaptive peak limiter
• Speaker system: 8" (200 mm) twin-cone speaker
• Features: Headphones, Line out, Pre/Post effect, Switchable DI-out, External parallel effect loop, Footswitch (internal/external effect on/off), 3.5 mm aux in jack socket, Tuner out
• Dimensions: 260 mm x 325 mm x 240 mm (10.20" x 12.80" x 9.45"), HxWxD
• Weight: 7.1 kg (15.6 lbs)